Example: Configure Zywall/Usg For Secuextender - ZyXEL Communications ZyWALL 1100 User Manual

The following table describes the labels in this screen.
Table 159 Configuration > VPN > SSL VPN > SecuExtender
LABEL
Latest Version
Current Version
Note:
Update Now

21.4.1 Example: Configure ZyWALL/USG for SecuExtender

Make these configurations on the ZyWALL/USG to allow the remote user to access resources behind
the ZyWALL/USG using SecuExtender. These steps can be performed in any order.
Create a user that can log into the ZyWALL/USG. Using the ZyWALL/USG web configurator, go to
1
Configuration > Object > User > Add and substitute your information for the information shown
in the following example.
Figure 254 Create a User
Next create an SSL VPN Access Privilege policy substituting your information for the information
2
shown in the following example. Using the ZyWALL/USG web configurator, go to Configuration >
VPN > SSL VPN > Access Privilege > Add.
Chapter 21 SSL VPN
DESCRIPTION
This displays the latest version of the ZyWALL/USG Security SecuExtender that
is available.
This displays the current version of SecuExtender that is installed in the
ZyWALL/USG.
You need to register first at portal.myzyxel.com to download the latest version of
SecuExtender.
The ZyWALL/USG periodically checks if there's a later version of SecuExtender at
the portal. The Update Now button is enabled when thre is.Click Update Now
to get the latest version of SecuExtender.
ZyWALL/USG Series User's Guide
388