Wireless Ap Information: Radio List - ZyXEL Communications ZyWALL 1100 User Manual

Table 50 Monitor > Wireless > AP Information
LABEL
Registration
IP Address
MAC Address
Model
Mgnt. VLAN ID (AC/AP)
Description
Station
Recent On-Line
Last Off-Line

6.13.2 Wireless AP Information: Radio List

Click Monitor > Wireless > AP Information > Radio List to display the Radio List screen.
Figure 103 Monitor > Wireless > Radio List
The following table describes the labels in this screen.
Table 51 Monitor > Wireless > Radio List
LABEL
More Information
#
AP Description
Model
MAC Address
Radio
Chapter 6 Monitor
DESCRIPTION
This field displays the registration information of the AP. You can set the AP's
registration at Configuration > Wireless > Controller screen. APs must be
connected to the ZyWALL/USG by a wired connection or network.
This field displays the IP address of the AP.
This field displays the MAC address of the AP.
This field displays the AP's hardware model information. It displays N/A (not
applicable) only when the AP disconnects from the ZyWALL/USG and the
information is unavailable as a result.
This displays the Access Controller (the ZyWALL/USG) and runtime management
VLAN ID setting for the AP. VLAN Conflict displays if the AP's management
VLAN ID does not match the Mgmnt. VLAN ID(AC). This field displays n/a if
the ZyWALL/USG cannot get VLAN information from the AP.
This field displays the AP's description, which you can configure by selecting the
AP's entry and clicking the Edit button.
This field displays the station count information.
This field displays the latest date and time that the AP was logged on.
This field displays the date and time that the AP was last logged out.
DESCRIPTION
Click this icon to see the traffic statistics, station count, SSID, Security Mode and
VLAN ID information on the AP.
This field is a sequential value, and it is not associated with a specific radio.
Enter a description for this AP. You can use up to 31 characters, spaces and
underscores allowed.
This field displays the AP's hardware model information. It displays N/A (not
applicable) only when the AP disconnects from the ZyWALL/USG and the
information is unavailable as a result.
This field displays the MAC address of the AP.
This field displays the Radio number. For example 1.
ZyWALL/USG Series User's Guide
121