Edit Remote Server Log Settings - ZyXEL Communications ZyWALL 1100 User Manual

The following table describes the labels in this screen.
Table 291 Configuration > Log & Report > Log Setting > Edit (USB Storage)
LABEL
Duplicate logs to
USB storage (if
ready)
Active Log
Selection
#
Log Category
Selection
OK
Cancel

35.3.4 Edit Remote Server Log Settings

The Log Settings Edit screen controls the detailed settings for each log in the remote server
(syslog). Go to the Log Settings Summary screen (see
remote server Edit icon.
Chapter 35 Log and Report
DESCRIPTION
Select this to have the ZyWALL/USG save a copy of its system logs to a connected USB
storage device. Use the Active Log section to specify what kinds of messages to include.
Use the Selection drop-down list to change the log settings for all of the log categories.
disable all logs (red X) - do not send the remote server logs for any log category.
enable normal logs (green check mark) - send the remote server log messages and
alerts for all log categories.
enable normal logs and debug logs (yellow check mark) - send the remote server log
messages, alerts, and debugging information for all log categories.
This field is a sequential value, and it is not associated with a specific entry.
This field displays each category of messages. The Default category includes debugging
messages generated by open source software.
Select what information you want to log from each Log Category (except All Logs; see
below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - log regular information and alerts from this
category
enable normal logs and debug logs (yellow check mark) - log regular information,
alerts, and debugging information from this category
Click this to save your changes and return to the previous screen.
Click this to return to the previous screen without saving your changes.
ZyWALL/USG Series User's Guide
666
Section 35.3.1 on page 658), and click a