Ap Management Screen - ZyXEL Communications ZyWALL 1100 User Manual

Zywall/usg series
Hide thumbs Also See for ZyWALL 1100:
Table of Contents

Advertisement

Table 68 Configuration > Wireless > Controller (continued)
LABEL
Apply
Reset

8.3 AP Management Screen

Use this screen to manage all of the APs connected to the ZyWALL/USG. Click Configuration >
Wireless > AP Management to access this screen.
Figure 127 Configuration > Wireless > AP Management
Each field is described in the following table.
Table 69 Configuration > Wireless > AP Management
LABEL
Edit
Remove
Reboot
#
IP Address
MAC Address
Model
R1 Mode / Profile
Mgmnt. VLAN
ID(AC)
Mgmnt. VLAN
ID(AP)
Description
ZyWALL/USG Series User's Guide
DESCRIPTION
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
Select an AP and click this button to edit its properties.
Select an AP and click this button to remove it from the list.
Note: If in the Configuration > Wireless > Controller screen you set the Registration
Type to Always Accept, then as soon as you remove an AP from this list it
reconnects.
Select an AP and click this button to force it to restart.
This field is a sequential value, and it is not associated with any entry.
This field displays the IP address of the AP.
This field displays the MAC address of the AP.
This field displays the AP's hardware model information. It displays N/A (not
applicable) only when the AP disconnects from the ZyWALL/USG and the information is
unavailable as a result.
This field displays the operating mode (AP) and AP profile name for Radio 1. It displays
n/a for the profile for a radio not using an AP profile.
This displays the Access Controller (the ZyWALL/USG) management VLAN ID setting for
the AP.
This displays the runtime management VLAN ID setting on the AP. VLAN Conflict
displays if the AP's management VLAN ID does not match the Mgmnt. VLAN ID(AC).
This field displays n/a if the ZyWALL/USG cannot get VLAN information from the AP.
This field displays the AP's description, which you can configure by selecting the AP's
entry and clicking the Edit button.
Chapter 8 Wireless
151

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents