ZyXEL Communications ZyWALL 1100 User Manual page 107

Table 38 Monitor > System Status > Interface Status (continued)
LABEL DESCRIPTION
HA Status This field displays the status of the interface in the virtual router.
• Active - This interface is the master interface in the virtual router.
• Stand-By - This interface is a backup interface in the virtual router.
• Fault - This VRRP group is not functioning in the virtual router right now. For example,
this might happen if the interface is down.
• n/a - Device HA is not active on the interface.
Zone This field displays the zone to which the interface is assigned.
IP Addr/Netmask This field displays the current IP address and subnet mask assigned to the interface. If the
IP address and subnet mask are 0.0.0.0, the interface is disabled or did not receive an IP
address and subnet mask via DHCP.
If this interface is a member of an active virtual router, this field displays the IP address it
is currently using. This is either the static IP address of the interface (if it is the master) or
the management IP address (if it is a backup).
IP Assignment This field displays how the interface gets its IP address.
• Static - This interface has a static IP address.
• DHCP Client - This interface gets its IP address from a DHCP server.
Services This field lists which services the interface provides to the network. Examples include
DHCP relay, DHCP server, DDNS, RIP, and OSPF. This field displays n/a if the interface
does not provide any services to the network.
Action Use this field to get or to update the IP address for the interface. Click Renew to send a
new DHCP request to a DHCP server. Click Connect to try to connect a PPPoE/PPTP
interface. If the interface cannot use one of these ways to get or to update its IP address,
this field displays n/a.
Tunnel Interface This displays the details of the ZyWALL/USG's configured tunnel interfaces.
Status
Name This field displays the name of the interface.
Status The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
Zone This field displays the zone to which the interface is assigned.
IP Address This is the IP address of the interface. If the interface is active (and connected), the
ZyWALL/USG tunnels local traffic sent to this IP address to the Remote Gateway
Address.
My Address This is the interface or IP address uses to identify itself to the remote gateway. The
ZyWALL/USG uses this as the source for the packets it tunnels to the remote gateway.
Remote Gateway This is the IP address or domain name of the remote gateway to which this interface
Address tunnels traffic.
Mode This field displays the tunnel mode that you are using.
Interface This table provides packet statistics for each interface.
Statistics
Refresh Click this button to update the information in the screen.
Expand/Close Click this button to show or hide statistics for all the virtual interfaces on top of the
Ethernet interfaces.
Name This field displays the name of each interface. If there is a Expand icon (plus-sign) next to
the name, click this to look at the statistics for virtual interfaces on top of this interface.
Chapter 6 Monitor
ZyWALL/USG Series User's Guide
107