Printer Function (Calibrate Sensor, Ethernet Setup, Rtc Setup ) - Wasp WPL304 User Manual

WPL 304 User Manual

3.5.2 Printer Function (Calibrate sensor, Ethernet setup, RTC setup )

1. Select the PC interface connected with barcode printer.
2. Click the "Function" button to setting.
3. The detail functions in the Printer Function Group are listed as below.
Calibrate Sensor
Ethernet Setup
_________________
RTC Time
Print Test Page
Reset Printer
Factory Default
_________________
Dump Text
Ignore AUTO. BAS
Configuration Page
Note:
For more information about Diagnostic Tool, please refer to the diagnostic utility quick start
guide in the CD disk \ Utilities directory.
Function
Calibrate the sensor specified in the Printer Setup
group media sensor field
Setup the IP address, subnet mask, gateway for
the on board Ethernet (Please refer to next
Synchronize printer Real Time Clock with PC
Print a test page
Reboot printer
Initialize the printer and restore the settings to
To activate the printer dump mode.
Ignore the downloaded AUTO. BAS program
Print printer configuration
Description
19