i3 International Ax46-series User Manual page 7

3.3 Mounting and adjusting camera
This is a dual axis camera and thus a ceiling mounting instead of a wall mounting is
recommended in order to provide the camera with an optimal view. When installing
on a wall, choose a location and field of view that is straight in front of the camera
as much as possible.
To mount the camera, do the following:
1. Prepare the surface for mounting. Drill screw holes on the surface with
the supplied camera mounting template. (Figure 3-3). If you need to route
cables from the bottom of the camera, cut a hole in the ceiling. Alternatively, if
necessary, cables can be routed through the opening on the side of the camera's
mounting base. (Figure 3-4).
i3-TRNG-CAMS-Ax46/66.indd
Fig 3-3 - Mounting template dimensions
Fig 3-4 - Camera base, side cable access
7
Rev. 130816