Rtsp Authentication; Snmp Settings - i3 International Ax46-series User Manual

RTSP Authentication:

•
Authentication: Enable to allow users to get the video stream using third party
players, such as VLC with the help or RTSP protocol.
Live View Parameters:
•
Protocol: Select the protocol for streaming live video from the camera to a
connected browser. Choose between TCP (best quality, but transmission
speed is slower, reducing real-time transmission), UDP (real-time transmission,
reduced quality), and HTTP (similar in quality to TCP, but without requiring
additional port settings).
•
Live View Performance: Least Delay, Balanced, Best Fluency
»
Least Delay: The video as seen by a user in Live View will be as close to
real-time as possible, but may result in somewhat jerky, low quality video.
»
Balanced: The video as seen by a user in Live View will be a compromise
between being as close to real-time as possible and having smooth
playback.
»
Best Fluency: The video as seen by a user in Live View will be as high
quality and smooth as possible, but may result in video that lags behind the
camera's actual view.
Live Record Video:
•
Record File Size: Select the file size per second. Choose between 256, 512, 1G.
•
Path Save: Saves the recording to a specified path.
Snapshot Record:.
•
Path Save: Saves a recording made by clicking the snapshot button:
to a specified path.
Live View Parameters:
•
Enable UPnP: Check to enable.
•
Friendly Name: This will be the camera's device name when UPnP is on.
•
Port: Input the HTTP Port, the HTTPS Port and the SDK port used.

SNMP Settings:

Use the settings in this section to use enable SNMP protocol for managing your
i3-TRNG-CAMS-Ax46/66.indd
31
Rev. 130816