Sony nxcam HXR-NX3D1E Operating Manual page 92

Photos cannot be played back.
Photos cannot be played back if you have

modified files or folders, or have edited the
data on a computer. (The file name flashes in
that case.) This is not a malfunction.
is indicated on a thumbnail.
This may appear on an image recorded on

other devices, edited on a computer, etc.
You removed the AC Adaptor or the battery

pack while the recording media icon at the top
right corner of the screen flashes, or before
the access lamp is turned off after recording.
This may damage your image data and
displayed.
is indicated on a thumbnail.
The image data base file may be damaged.

Check the data base file by touching
(MENU)  [Setup]  [
Settings)]  [Repair Img. DB F.]  the
recording medium. If it still appears, delete the
image with (p. 46).
No sound or only a quiet sound is heard
during playback.
Turn up the volume (p. 30).

When you record sound with [Micref Level]

(p. 76) set to [Low], the recorded sound may
be difficult to hear.
Sounds cannot be recorded while shooting

with [Smth Slw REC] or [Golf Shot] .
appears on the LCD screen.
This appears when you play back movies

recorded with 5.1ch surround sound. 5.1ch
surround sound is down-mixed to 2ch stereo
and played back on your camcorder.
GB

is
( Media
Playing back images stored on
memory card on other devices
Images cannot be played back or the
memory card is not recognized.
The playback device does not support playing

back memory cards (p. 4).
Editing movies/photos on your
camcorder
Unable to edit.
Unable to edit because of the condition of the

image.
A movie cannot be divided.
A movie that is too short cannot be divided.

A protected movie cannot be divided.

A photo cannot be captured from a
movie.
The recording media where you want to save

photos is full.
Set the 2D/3D switch to 2D (p. 24).

Playback on the TV
Neither image nor sound is played on the
connected TV.
When you are using a component A/V cable

(supplied), set [Component] according to the
requirements of the connected device (p. 83).
When you are using the component video

plug, make sure the red and white plugs of
the component A/V cable (supplied) are
connected (p. 32).
Images are not output from the HDMI OUT

jack, if copyright protection signals are
recorded in the images.