Sony nxcam HXR-NX3D1E Operating Manual page 88

The following menu items return to the

default settings when you switch among movie
recording and photo recording and playback
modes.
[ Fader]

[ Self-Timer]

[Tele Macro]

The following menu items return to the default

settings when you operate the 2D/3D switch.
[White Balance]

[IRIS]

[Shutter Speed]

[AE Shift]

[White Balance Shift]

[Low Lux]

[Scene Selection]

[Auto Back Light]

Your camcorder gets warm.
Your camcorder may become warm during

operation. This is not a malfunction.
A rattling noise can be heard when you
shake the camcorder.
If no noise is heard when the camcorder is

turned on and is in the movie/photo recording
mode, the noise is produced by the movement
of the internal lens. This is not a malfunction.
Intelligent Auto is canceled.
The Intelligent Auto setting is canceled if you

change the following settings:
[Smth Slw REC]

[Golf Shot]

[White Balance]

[Spot Meter/Fcs]

[Spot Meter]

[Spot Focus]

[Exposure]

[Focus]

[IRIS]

[Shutter Speed]

[AE Shift]

[White Balance Shift]

[Low Lux]

[Scene Selection]

GB

[Tele Macro]

[ SteadyShot]

[ SteadyShot]

[Auto Back Light]

[Face Detection]

The supplied Wireless Remote
Commander does not function.
Set [Remote Ctrl] to [On] (p. 85).

Insert a battery into the battery holder with

the +/– polarities correctly matching the
+/– marks (p. 118).
Remove any obstructions between the

Wireless Remote Commander and the remote
sensor.
Point the remote sensor away from strong light

sources such as direct sunlight or overhead
lighting. Otherwise, the Wireless Remote
Commander may not function properly.
Remove the supplied lens hood

Another DVD device malfunctions when
you use the supplied Wireless Remote
Commander.
Select a commander mode other than DVD 2

for your DVD device, or cover the sensor of
your DVD device with black paper.
Batteries/power sources
The power abruptly turns off.
Use the AC Adaptor.

If [A. Shut Off] is set to [On], when about

5 minutes have elapsed while you do not
operate your camcorder, the camcorder is
automatically turned off (A. Shut Off). Change
the setting of [A. Shut Off] (p. 85), or turn on
the power again.
Charge the battery pack (p. 13).

The CHG (charge) lamp does not light
while the battery pack is being charged.
Close the LCD screen (p. 13).

.