Inputting external sound
INPUT1 jack
INPUT2 jack
Selecting a sound source
INPUT1 (LINE/MIC/MIC+48V) switch
INPUT2 (LINE/MIC/MIC+48V) switch
Selecting a sound source level
ATT (INPUT1) switch
ATT (INPUT2) switch
Selecting channel setting for recording
REC CH SELECT (INPUT1) switch
GB
Selecting the recording level
AUTO/MAN (CH1) switch
AUDIO LEVEL (CH1) dial
AUTO/MAN (CH2) switch
AUDIO LEVEL (CH2) dial
Switching wind noise reduction to
ON/OFF
LOW CUT (INPUT1) switch
LOW CUT (INPUT2) switch
Attach the XLR Adaptor (p. 9),
and connect the supplied
microphone to INPUT1 jack .
Set the INPUT1 (LINE/MIC/
MIC+48V) switch to MIC+48V.
Set the REC CH SELECT (INPUT1)
switch to CH1·CH2
This setting enables recording on both
CH1, CH2. Set the switch to CH1 if
you want to record on CH1 only.
Adjusting the recording level
You can adjust the recording level input
from the INPUT1 /INPUT2 jacks.
You cannot adjust the recording level of the
internal microphone and MIC input jack.
Set the AUTO/MAN (CH1/CH2)
switch of the channel to be
adjusted ( or ) to MAN.