Table of Contents
Advertisement
The horizontal to vertical ratio of the
movie (16:9 (wide)/4:3) cannot be
changed.
The horizontal to vertical ratio of high
definition image quality (HD) movies is 16:9
(wide).
The auto focus does not function.
Set [Focus] to [Auto] (p. 70).
The recording conditions are not suitable for
auto focus. Adjust the focus manually (p. 70).
SteadyShot does not function.
Set [
SteadyShot] to [Active] or [Standard]
(p. 73), [
SteadyShot] to [On] (p. 73).
Even if [
SteadyShot] is set to [Active] or
[Standard], [
SteadyShot] to [On], your
camcorder may not be able to compensate for
excessive vibrations.
Tiny spots in white, red, blue, or green
appear on the screen.
This phenomenon appears when using a
slow shutter speed (p. 70). This is not a
malfunction.
The subjects passing by the screen very
fast appear crooked.
This is called the focal plane phenomenon.
This is not a malfunction. Because of the way
the image device (CMOS sensor) reads out
image signals, the subjects passing by the lens
rapidly might appear crooked depending on
the recording conditions.
Horizontal stripes appear on the images.
This occurs when recording images under a
fluorescent lamp, sodium lamp, or mercury
lamp. This is not a malfunction.
Black bands appear when you record a TV
screen or computer screen.
Set [
SteadyShot] to an option except for
[Active] (p. 73).
Adjust the shutter speed (p. 40).
[LCD Brightness ] cannot be adjusted.
You cannot adjust [LCD Brightness ] when:
The LCD panel is closed on your camcorder
with the LCD screen facing out.
The power is supplied from the AC Adaptor.
Sound is not recorded correctly.
If you disconnect an external microphone, etc.
during recording movies, sound may not be
recorded correctly.
Connect the microphone again in the same
way as when you start recording movies.
If you leave the camcorder on a table, etc.
when recording, noise may be recorded.
Hold the camcorder with your hand when
recording.
The time code is not recorded in
sequence.
The time code may not be recorded
sequentially if you change the settings of
[
/
Setting], [
[
Frame Rate] (p. 37).
Playback
Images cannot be played back.
Select the type of recording media you want to
play back (p. 20).
Select the image quality of the movie you want
to play back (p. 37).
Images recorded on other devices may not be
played back. This is not a malfunction.
Frame Rate], or
GB
1
- Quick Links:
- Recording Movies
Hide quick links:
Advertisement
Table of Contents
