Table of Contents
Advertisement
Notes
The subject you touched may not be detected,
depending on the surrounding brightness or
hairstyle of the subject. In this case, touch the
subject again when you record.
If you want to track a face, set the [Face
Detection] (p. 74) setting to other than [Off]
([Auto] is the default setting).
Tips
The double-lined frame around a face targeted
for possible smile detection shot turns orange.
If the face you touched disappears from the
LCD screen, the subject selected in [Face
Detection] (p. 74) has priority. If the face you
touched returns to the screen, that face has
priority.
Recording high quality
photos during movie
recording (Dual Rec)
You can record photos during movie
recording by pressing PHOTO.
Notes
may appear when the capacity of the
recording media is not enough or when you
record photos continuously. You cannot record
photos while
Depending on the [
Frame Rate] selected,
LCD screen and you may not be able to use the
Dual Rec function.
Tips
When the MODE lamp is set to
the size of photos becomes [5.3M] (16:9) or
[4.0M] (4:3).
You can record photos during recording
standby in the same way as when the
lamp is turned on. However, when [
Rate] is set to [25p], you cannot record photos
while the camcorder is in movie recording
mode.
GB
0
is displayed.
REC Mode] or [
appears on the
(Movie),
(Photo)
Frame
Recording in mirror
mode
Open the LCD panel 90 degrees to the
camcorder (), then rotate it 180 degrees
to the lens side ().
Tips
A mirror-image of the subject appears on the
LCD screen, but the image will be normal when
recorded.
Controlling the image
settings manually with
the MANUAL dial
You can assign 1 menu item you use often
to the MANUAL dial.
Since [3D Depth Adjustment] is assigned to
the MANUAL dial in the default setting, the
operation below is described as adjusting
the 3D depth using the dial. [3D Depth
Adjustment] is a function which adjusts
the depth of the image appearing on the
display of the camcorder while recording
3D movie.
Advertisement
Table of Contents
