Saving Images With A Computer; Step 1 Checking The Computer System; Step 2 Installing The Supplied Software "Content Management Utility - Sony nxcam HXR-NX3D1E Operating Manual

Saving images with a
computer
Preparing a computer (Windows)
You can perform following operations using
"Content Management Utility. "
Importing images to a computer

Viewing imported images

Creating 2D left & right movies from 3D

movie
Detecting and correcting flash bands

To save movies using a computer, install
the software from the supplied CD-ROM
"Content Management Utility" beforehand.
Use commercially available software to edit
images or create discs.
Step 1 Checking the computer
system
OS
* 1
Microsoft Windows XP SP3
SP2 /Windows 7 SP1
* 3
CPU
Use an Intel Core 2 Duo 2.80 GHz CPU
equivalent or faster to play back videos with
high definition image quality (HD) in the
highest quality.
Videos with high definition image quality
(HD) recorded in other than the highest
quality may be played back with a slower
CPU.
Depending on the performance of your
video card, videos with high definition image
quality (HD) recorded using the highest
quality may be played back with a slower
CPU than that recommended above.
For the following operations, an Intel
Pentium III 1GHz or faster is necessary.
Importing movies to the computer

Processing with standard definition image

quality (STD)
Memory
For Windows XP: 512 MB or more (1 GB or
more is recommended.)
For Windows Vista/Windows 7: 1 GB or
more
/Windows Vista
* 2
Hard disk
Disk volume required for installation:
Approximately 100 MB
Only the NTFS or exFAT file system can be
used for specifying to importing videos or
registering them for viewing.
Display
Minimum 1,024 × 768 dots
Others
USB port (this must be provided as standard,
High-Speed USB (USB 2.0 compatible)) (CD-
ROM drive is necessary for installation)
Standard installation is required. Operation is
* 1
not assured if the OS has been upgraded or in
a multi-boot environment.
64-bit editions and Starter (Edition) are not
* 2
supported.
Starter (Edition) is not supported.
* 3

Notes
Operation with all computer environments is

not assured.
The supplied software "Content Management

Utility" is not supported by Macintosh
computers.
Step 2 Installing the supplied
software "Content Management
Utility"
Install "Content Management Utility"
before connecting your camcorder to a
computer.
 Confirm that your camcorder is
not connected to the computer.
 Turn on the computer.
Log on as an Administrator for

installation.
Close all applications running on the

computer before installing the software.
GB