Sony nxcam HXR-NX3D1E Operating Manual page 41

MANUAL
button
MANUAL dial

Press MANUAL to make the
camcorder adjust the depth of
the 3D image.
Pressing MANUAL repeatedly toggles
between enabling and disabling the
3D depth adjustment.

Rotate the MANUAL dial to adjust
the 3D depth while checking the
image on the LCD screen.
Items you can control with the
MANUAL dial
3D recording
[3D Depth Adjustment]

[Focus] ... p. 70

[Exposure] ... p. 70

2D recording
[Focus] ... p. 70

[Exposure] ... p. 70

[IRIS] ... p. 70

[Shutter Speed] ... p. 70

[AE Shift] ... p. 71

[White Balance Shift] ... p. 71

To assign the menu item to the
MANUAL dial
 Press and hold MANUAL down for a
few seconds.
The [Dial Setting] screen appears.
 Rotate the MANUAL dial and select the
item to be assigned.
 Press MANUAL.

Notes
Manual settings will be retained even if you

change the assigned item of the MANUAL dial.
However, if you set [Exposure] after setting
[AE Shift] manually, [Exposure] will override
[AE Shift].
If you set either one of [Exposure], [IRIS], or

[Shutter Speed], the settings of other 2 items
are canceled.
If you select [RESET] in step , all the items

adjusted manually are reset to the default
settings.
Tips

If you touch at the right of the screen while

setting [3D Depth Adjustment], the manual
setting of [3D Depth Adjustment] is canceled.
In the case of items other than [3D Depth

Adjustment], pressing MANUAL switches
between automatic and manual settings.
You can also assign menu items to the

MANUAL dial by touching
[Camera/Mic]  [
 [Dial Setting].
Even if you open the IRIS wider (a smaller

F-stop) than F3.4 when you set the zoom lever
to the W (Wide angle) side, the IRIS is reset
to F3.4 as you move the zoom lever to the T
(Telephoto) side.
(MENU) 
( Camera Settings)]
GB
1