Sony nxcam HXR-NX3D1E Operating Manual page 18

8
Aim the camcorder at a subject to display it on the LCD screen.
Be sure that the subject produces a scale higher than the

If you feel uncomfortable viewing the image in 3D, press 2D/3D DISP and check the image in 2D
(p. 24).
9
Touch
The camcorder automatically zooms in or out to adjust the lenses. Do not change the subject until

the adjustment is completed.

Notes
If [Could not adjust.] appears, touch [Run Again].

If the 2D/3D switch (p. 24) is set to 2D, the [Auto 3D Lens Adjust] screen does not appear.

Type of subjects that should be displayed on the LCD screen for [Auto 3D Lens
Adjust]
The scale indicated varies depending on the subject displayed on the LCD screen.
Subjects that indicate a higher scale:
Bright subjects, such as objects outdoors in daylight

Subjects with various colors and shapes

Subjects that indicate a lower scale and result in adjustment failure:
Dark subjects, such as objects viewed at night

Subjects within 2 m (6 ft. 6 3/4 in.) away from the camcorder

Plain, non-colorful subjects

Subjects that repeat the same pattern, such as rows of windows on buildings

Moving subjects

GB
1
Scale
.
mark. The subject will appear doubled.
