Sony nxcam HXR-NX3D1E Operating Manual page 29

 Change to the movie/photo recording mode
 Time-line bar
 Change Event Scale button
The Event Index screen appears when you touch the event that is displayed on the center.

You can also choose an event by touching on

(Change Event Scale button ) on the bottom right of the screen so that you can change
Touch

the time range of the time-line bar from one and a half years to 3 months, which changes the
number of the events that can be displayed on the time-line bar.
4
Touch an image you want to view.
 To go back to the Event View screen
 Displays the previous/next page (Touching and holding the button scrolls the index
screen.)
 Changes to the movie/photo recording mode
 Event title
 Switch Image Type button (2D only)
 Total playing time of movies in the event.
Touch  to select the image type to be displayed in the index from [

[ PHOTO] (photos only), or [
PHOTO] (photos only) is selected, total number of photos in the event is displayed in .
 appears with the movie or photo that was most recently played or recorded. If you touch the

movie or photo with , you can continue playback from the previous time.

Notes
If you operate the 2D/3D switch, the recording mode screen appears. Do not operate the 2D/3D switch

during playback.
Tips

When the 2D/3D switch is set to 3D, only 3D movies are played back. When the switch is set to 2D, both

3D and 2D images are played back in 2D.
You can view 3D movies in 2D by pressing 2D/3D DISP (p. 25).

the time-line bar.

MOVIE/PHOTO] (movies and photos mixed). When [
MOVIE] (movies only),
GB