About Language Setting; Viewing 3D Movies - Sony nxcam HXR-NX3D1E Operating Manual

Microphone
Lens hood
The camcorder is not dustproofed, dripproofed

or waterproofed. See "About handling of your
camcorder" (p. 106).

Viewing 3D movies

You may feel uncomfortable symptoms

such as eyestrain, nausea, or a tired feeling
while watching 3D movies recorded with
the camcorder on 3D compatible monitors.
When you watch 3D movies, we recommend
that you take a break at regular time intervals.
Since the need for or frequency of break times
varies between individuals, please set your
own standards. If you feel sick, stop watching
3D movies, and consult a doctor as needed.
Also, refer to the operating instructions of
the connected device or the software used
with the camcorder. A child's vision is always
vulnerable (especially for children under 6
years of age). Before allowing them to watch 3D
movies, please consult with an expert, such as a
pediatric or ophthalmic doctor. Make sure your
children follow the precautions above.
The way people perceive 3D movies varies from

person to person.
XLR Adaptor when a tripod
is attached to the camcorder
Menu items, LCD panel, and lens
Avoid operating the touch panel under

following conditions, as doing so may cause a
malfunction of the camcorder.
When there are droplets of water on the touch

panel
With wet fingers

With a pointed object such as pencil,

ballpoint pen, nail, etc.
Holding the camcorder by grabbing the panel

inside the frame
With gloves on

A menu item that is grayed out is not available

under the current recording or playback
conditions.
The LCD screen is manufactured using

extremely high-precision technology, so over
99.99% of the pixels are operational for effective
use. However, there may be some tiny black
points and/or bright points (white, red, blue,
or green in color) that appear constantly on the
LCD screen. These points are normal results of
the manufacturing process and do not affect the
recording in any way.
Black points
White, red, blue or green points
Exposing the LCD screen or the lens to direct

sunlight for long periods of time may cause
malfunctions.
Do not aim at the sun. Doing so might cause

your camcorder to malfunction. Take images
of the sun only in low light conditions, such as
at dusk.

About language setting

The on-screen displays in each local language

are used for illustrating the operating
procedures. Change the screen language before
using the camcorder if necessary (p. 19).
GB