Vacon nx User Manual page 99

CONTROL KEYPAD
Parameter sets
Select
Parameter sets
Wait...
Figure 7-11. Storing and loading of parameter sets
Upload parameters to keypad (To keypad, S6.3.2)
This function uploads all existing parameter groups to the keypad provided that the drive is stopped.
To keypad
Enter the page (S6.3.2) from the
Browser buttons
edit mode. Use the
until 'OK' appears on the display.
READY
Copy Parameters
 P4
P1
READY
Up to keypad
Wait...
Figure 7-12. Parameter copy to keypad
Download parameters to drive (From keypad, S6.3.3)
This function downloads one or all parameter groups uploaded to the keypad to a drive provided that the
drive is in STOP status.
From keypad
Enter the
the edit mode. Use the
parameters
and press the
The procedure to download the parameters from keypad to drive is similar to that of from drive to keypad.
See above.
24-hour support +358 (0)201 212 575 • Email: vacon@vacon.com
READY
READY
Parameter copy menu
to select the option
READY
Up to keypad
Select
READY
Up to keypad
OK
Parameter copy menu
page (S6.3.3) from the
Browser buttons
to select either the option
Enter button
. Wait until 'OK' appears on the display.
READY
Parameter sets
LoadFactDef
READY
Parameter sets
OK
. Push the
All parameters
Up to keypad
All param.
. Push the
All parameters
vacon • 99
enter
CONFIRM
CANCEL
Menu button right
to enter the
Enter button
and press the
READY
CONFIRM
enter
CHANGE VALUE
CANCEL
Menu button right
Application
or
. Wait
to enter
7