Vacon nx User Manual page 102

102 • vacon
Parameter lock (P6.5.2)
This function allows the user to prohibit changes to the parameters.
If the parameter lock is activated the text
value.
NOTE: This function does not prevent unauthorised editing of parameter values.
Enter the edit mode by pushing the
lock status. Accept the change with the
left
.
READY
I/Oterm
System Menu
S1  S9
READY
I/Oterm
Parameter Lock
ChangeEnable
Figure 7-15. Parameter locking
Start-up Wizard (P6.5.3)
The Start-up Wizard is a feature on the control keypad to facilitate the commissioning of the frequency
converter. If selected active (default), the Start-up Wizard prompts the operator for the language and
application of his/her choice plus for the values for a set of parameters common to all applications as
well as for a set of application-dependent parameters.
Always accept the value with the
(up and down arrows).
Set the Start-up Wizard active in the following way: In the System Menu, find page P6.5.3. Press the
button right
once to reach the edit mode. Use the
Enter button
selection with the
No
the parameter value
READY
I/Oterm
Startup wizard
No
Figure 7-16. Activation of Start-up wizard
7
*locked*
Menu button right.
Enter button
I/Oterm
Security
P1
I/Oterm
Parameter Lock
enter
ChangeDisabl
Enter button
, scroll options or change values with the
. If you want to deactivate the function follow the same procedure and give
.
READY
I/Oterm
Startup wizard
No
will appear on the display if you try to edit a parameter
Browser buttons
Use the
or return to the previous level with the
READY
Parameter Lock

P4
ChangeEnable
READY
Browser buttons
to set value
I/Oterm
Startup wizard
Yes
Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205
CONTROL KEYPAD
to change the parameter
Menu button
READY
I/Oterm
Browser buttons
Yes
and confirm the
READY
enter
CONFIRM
CANCEL
Menu