Vacon nx User Manual page 108

108 • vacon
Software (S6.8.3)
Software
The information page includes information on the following frequency converter software related
topics:
Page
6.8.3.1 Software package
6.8.3.2 System software version
6.8.3.3 Firmware interface
6.8.3.4 System load
Table 7-9. Software information pages
Applications (S6.8.4)
At location S6.8.4 you can find the
application currently in use but also all other applications loaded into the frequency converter. The
information available is:
Page
Name of application
6.8.4.#
6.8.4.#.1 Application ID
6.8.4.#.2 Version
6.8.4.#.3 Firmware interface
Table 7-10. Applications information pages
READY
I/Oterm
Applications
A7

A1
Figure 7-25. Applications info page
Applications
In the information page, push the
there are as many as there are applications loaded into the frequency converter. Locate the application you
want information about with the
button right
. Use again the
Hardware (S6.8.5)
Hardware
The information page provides information on the following hardware-related topics:
Page
6.8.5.1 Power unit type code
6.8.5.2 Nominal voltage of the unit
6.8.5.3 Brake chopper
6.8.5.4 Brake resistor
Table 7-11. Hardware information pages
7
Content
Applications submenu
Content
I/Oterm
Standard
D1
I/Oterm
Basic
D1
Menu button right
Browser buttons
and then enter the
Browser buttons
to see the different pages.
Content
containing information about not only the
D3

READY
Application id
D3

NXFIFF01
to enter the Application pages of which
Information pages
Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205
CONTROL KEYPAD
I/Oterm
Version
2.01
READY
I/Oterm
Menu
with the