6.10 Swimming Pool; Overview; Setpoints; Priority - Siemens RVS41.813 User Manual

Refrigeration request

Overview

Setpoints

Setpoint solar heating
Setpoint source heating

Priority

Siemens Switzerland Ltd
HVAC Products
Yes
The consumer group is connected downstream from the primary controller / system
pump. The primary controller ensures control of a valid heat or refrigeration request, or
the system pump is activated.
2-pipe system
The Hx cooling circuit and the heating circuit obtain their cooling or heating energy
from the same circuit .
4-pipe system
The Hx cooling circuit and the heating circuit obtain their cooling or heating energy
from separate circuits
.

6.10 Swimming pool

B13
1
0
K18
Line no. Operating line
2055 Setpoint solar heating
2056 Setpoint source heating
When using solar energy, the swimming pool is heated up until this setpoint is reached.
The "Protective collector overtemperature" function can reactivate the collector pump
until the maximum swimming pool temperature is reached.
When using the heat source, the swimming pool is heated up until this setpoint is
reached.
Line no. Operating line
2065 Charging priority solar
No
Swimming pool heating through solar charging does not give consideration to any
priorities. If storage tank charging priority (3822) is deactivated also, the swimming pool
is heated alternately with the storage tanks, the temperature increase being 5 °C.
Yes
Swimming pool heating through solar charging is given priority. This also applies if
storage tank charging priority (3822) would have to give preference to other heat
exchangers.
User manual RVS61.843, RVS41.813
6 The settings in detail
The controller facilitates swimming pool heating with solar
energy or a heat pump on the basis of separately adjustable
setpoints. In the case of solar heating, it is possible to select
priority of swimming pool heating over storage tank
charging.
111/258
CE1U2355en_02
28. September 2009