Programming The Qaa75; Setting Principle; Example "Setting The Time Of Day - Siemens RVS41.813 User Manual

Setting principle

Example "Setting the time of day"

Siemens Switzerland Ltd
HVAC Products
5.1.2 Programming the QAA75... / QAA78... / AVS37..
Settings that cannot be made directly with the operating elements are made through
programming. For this purpose, the individual settings are structured in the form of
menus and operating lines, thus creating practical groups of settings.
The following example shows how to set the time of day and the date.
• Press the ESC button to go one step back at a time, readjusted values are not
adopted
• If no setting is made for 8 minutes (2 minutes with RF devices), the unit will
automatically return to the basic display
• Certain operating lines may be hidden at certain times, depending on the type of unit
and the operating level.
Operation Display example
1
Room temperature
0
2
Time of day and date
Text3
Operator section
0
3
Time of day and date
Hours / minutes
0
4
Time of day and date
Hours / minutes
0
User manual RVS61.843, RVS41.813
5 Handling
Description
Basic display.
AUTO
If the basic display is not shown, press
the ESC button to go back.
Press OK.
4 8 12 16 20 24
The bottom section of the display
AUTO
shows various menus.
Turn the setting knob until menu Time
of day and date appears.
Press the OK button to confirm.
4 8 12 16 20 24
In the bottom section of the display, the
AUTO
first operating line of menu Time of day
and date appears.
Turn the setting knob until operating
line Hours / minutes appears.
4 8 12 16 20 24
Press the OK button to confirm.
The display shows the hours blinking.
AUTO
Turn the setting knob until the hours of
the time of day are correct.
Press the OK button to confirm.
4 8 12 16 20 24
43/258
CE1U2355en_02
28. September 2009