Advanced Settings; Setting The Ignition Current And Upslope Time - EWM Pico 180 Operating Instructions Manual

Design and function
TIG welding
5.7.5

Advanced settings

5.7.5.1

Setting the ignition current and upslope time

To change the advanced setting parameters, hold down the "Welding parameters"
button for 2 seconds after selecting the welding process.
The following diagram shows the setting options.
Display
28
Setting/selection
Ignition current
Setting: 1% to 200% of main current AMP (depending on main current)
Upslope time to main current
Setting: 0.0 sec. to 20.0 sec. (factory setting 1.0 sec.)
NOTE
Figure 5-10
099-002003-EW501
19.09.2011