KTD-N0903-C
Clear CMOS Settings" (Clear CMOS – J3)
7.12
The Jumper has 3 positions: Pin 1-2, Pin2-3 (default position) and not mounted.
Warning Don't leave the jumper in position 1-2, otherwise if power is disconnected, the
!
battery will fully deplete within a few weeks.
CMOS1
pin1-2
pin2-3
X
-
-
X
-
-
Page 34
pin 1
Description
Clear CMOS settings exclusive erasing Password
Default position
No function. Note: may load default BIOS settings after several minutes
mITX-E38 Users Guide
Internal Connectors