Clearing Error Messages; Clearing A Reset Message - Kodak RP 50 2J0686 Operator's Manual

Diagnostics and Troubleshooting

Clearing Error Messages

To clear an error or warning message from the OCP, the condition causing the
error or warning must be corrected. Paper jam, drive errors and temperature
errors must be cleared from the material function.

Clearing a Reset Message

If the processor is reset, the "MACHINE RESET" error message will appear on the
top line of the LCD display on the processor's OCP. Press any function key to
erase the message.
If the processor is reset and the values for a function are reset to factory settings,
a reset message for that function will also appear (for example: "CLOCK
RESET").
To clear a function reset message, press the function key for the function the
message refers to.
LCD display
MACHINE RESET
SET
function keys
October 2002 5-17