Appendix C: Additional Calibration
Installing the Calibration Software
October 2002
The topics covered in this section include:
•
Installing the Calibration Software
•
An overview of the KODAK Device Calibration Software
•
Advanced Features of the RP 50 Calibration Software
•
Installing the Densitometer
IMPORTANT: For the step-by-step procedure to calibrating the printer, see
"Calibrating the Printer" on page 2-3.
Installing the software includes installing both the Kodak Device Calibration
Software (which manages the calibration of multiple Kodak devices) and the
Calibration Software.
System Requirements
MACINTOSH Version
•
Power MACINTOSH System 7.5 or above
•
Minimum of 35 MB free disk space
•
608 K free disk space for each of as many as six configured devices
•
256 colors at 640 x 480 spatial resolution
•
CD ROM Drive
WINDOWS NT Version
•
100 MHz PENTIUM Processor
•
64 MB Main System Memory
•
VGA Monitor (640 x 480 spatial resolution)
•
CD ROM Drive
Information
C-1