Shutting Down The Processor - Kodak RP 50 2J0686 Operator's Manual

Using the System

Shutting Down the Processor

2-10
To shut down the processor, press the On/Off key on the processor OCP.
Shutting down the processor for service
If you are shutting the processor down for service, turn off the processor circuit
breaker after the green light on the OCP is no longer illuminated. The exhaust fan
in the processor will continue to operate.
IMPORTANT: If the processor will not be used for longer than four days, drain,
flush, and clean the processor tanks.
1. Remove the top cover and the light tight cover from the processor.
top cover
light tight cover
October 2002