Table of Contents
Advertisement
October 2002
Weekly Maintenance
Checking the Tension of the Main Drive Chain
WARNING: Turn off the main power for the processor on the operator control
panel and at the circuit breaker to prevent injury from moving
parts and high voltage electricity and to prevent losing the
processor parameters.
Check that the tension on the main drive chain and all of the drive chains in the
transport assemblies of the processor is correct. If any drive chain has more than
0.50 in. of movement in the up and down direction, adjust the chain tension or
remove a link from the drive chain. To adjust the tension of the main drive chain,
change the position of the idler roller.
idler roller
Checking the Circulation
Observe the circulation of the chemicals in the tanks to be sure that the chemical
pumps are working properly. If the chemicals are not circulating, replace the wash
and chemical filters. If necessary, call for service.
chemicals
Maintaining the Equipment
main drive
chain
4-7
Advertisement
Table of Contents
Troubleshooting
