Loading Paper Into The Supply Cassette - Kodak RP 50 2J0686 Operator's Manual

gear
October 2002

Loading Paper into the Supply Cassette

1. Unlock the supply cassette.
2. Open the supply cassette.
3. If necessary, remove paper scraps from the core support assembly.
4. Remove the old core and support assembly from the supply cassette.
NOTE: Keep the felt surfaces clean to prevent scratches on the paper.
felt
5. Remove the screw lock and the old cardboard core from the core support
assembly.
6. Move the screw adjuster to the correct position for the paper size you are
loading. Pull the metal spring for the screw adjuster away from the gear and
slide the screw adjuster to the correct position until it locks into place in the
detent.
screw adjuster
core support
assembly
System Operating Procedures
old core and core support assembly
supply cassette locks
cardboard core
felt
screw lock
3-7