Error Messages - Kodak Digital science 8650 PS User Manual

4. Error Messages

Error Message
Media File is Missing
Image Mode is invalid!
You must convert this image to CMYK Color,
RGB Color, or Greyscale in PHOTOSHOP
before it can be printed, or you can reprint the
image currently stored in the printer.
The file is too large for the Kodak Color Printer!
Resize the image in Photoshop before printing.
The maximum size is 150 MB.
AppleTalk is inactive.
Set AppleTalk to "Active" in the Chooser.
(Only on Macintosh systems.)
The printer cannot be found!
Check connections, make sure the printer is
turned on, or select another 8650 printer.
The printer cannot scale the image (up or
down) enough to completely fit (fill) the page!
The export module will set the scaling to the
limit of the printer.
September 1997
Many of the error messages displayed by the export
module are self-explanatory. The following list provides
additional information for frequently encountered
messages.
If you do not find a displayed error message in the list, refer
to your Macintosh, Windows, or Photoshop documentation.
Select a media file from the Media
Files folder (Macintosh) or
MEDFILES (PC) folder. The folder is
located in Photoshop's Plug-in folder
(Macintosh) or XPORTMOD (PC) in
the Calibration Utility folder.
Change the Photoshop mode to print
the file.
Make the image smaller to print the
file. To make the image smaller,
select Image Size from the Image
menu, and enter a smaller height
or width.
Indicates AppleTalk is not running.
Open the Chooser, turn AppleTalk
on, and then restart the Macintosh.
Indicates that the printer is not
connected or turned on.
Indicates the scaling limits in the
printer were exceeded. The export
module will readjust the scaling to fit
the printer.
Solution
5-1