Kodak RP 50 2J0686 Operator's Manual page 41

October 2002
IMPORTANT: Make sure that the right and left edges of the paper on the paper
roll remain aligned. Do not allow the roll of paper to slide or
"telescope."
12. Feed the lead edge of the paper through the slotted opening in the paper
cassette.
slotted opening
image or emulsion
side
13. Close the supply cassette and latch the supply cassette locks.
NOTE: Be sure that the core support assembly rotates freely in the supply
cassette and that the paper feeds freely.
System Operating Procedures
screw lock
lead edge of the paper
core support assembly
(side without the gear)
3-9