Kodak RP 50 2J0686 Operator's Manual page 40

System Operating Procedures
3-8
TIP: Practice the following steps in the light with an empty cardboard core
before you load a new roll of paper in the dark.
CAUTION: Loading paper into the paper cassette must be completed in
a darkroom with the lights off.
7. Position the paper so that the lead edge of the paper is away from you.
8. Insert the core support assembly into the roll of paper as shown.
9. Push the cardboard core toward the gear until it engages the detent.
cardboard core
10. Install the screw lock onto the core support assembly and ensure that it is
snug.
CAUTION: Do not overtighten the screw lock.
11. Place the core support assembly with the full paper roll into the supply
cassette.
detent
October 2002