Turning The Scan Station On And Off; Adjusting The Input And Output Trays - Kodak SCAN STATION 100 User Manual

Turning the Scan
Station on and off
Adjusting the input
and output trays
2-2
• Press the power switch on the back of the Scan Station to On (I).
Wait for the Scan Station to complete the self-test. When
completed, the green indicator on the Scan Station remains on and
constant.
NOTE: If you need to restart/recycle the power to the Scan Station,
press and hold the green Soft Start button for about 5 seconds.
• To power-down the Scan Station, press the button on the back of the
Scan Station to Off (O).
The input tray can be adjusted to fit different document sizes.
• Grasp the side guides and slide them to the desired position.
The output tray can be adjusted to accommodate documents longer
than 11 inches (A4).
• Open the extender on the output tray.
NOTE: The Special Document Feeder requires no special adjustments.
Soft Start
button
Power switch
A-61544 April 2006