Safety Information; User Precautions - Kodak SCAN STATION 100 User Manual

Safety information

User precautions

A-61544 April 2006
• When placing the Scan Station, make sure that the electrical power
outlet is located within 1.52 metres (5 feet) of the Scan Station and is
easily accessible.
• Place Scan Station on a level work surface capable of supporting
18.1 kgs (40 lbs).
• Material Safety Data Sheets (MSDS) for chemical products are
available on the Kodak website at: www.kodak.com/go/msds. When
accessing the MSDSs from the website, you will be required to
provide the catalog number of the consumable you want the Material
Safety Data Sheet for. See the section entitled, "Supplies and
consumables" later in this guide for supplies and catalog numbers.
Users and their employer need to observe the common sense
precautions applicable to the operation of any machinery. These
include, but are not limited to, the following:
• Do not wear loose clothing, unbuttoned sleeves, etc.
• Do not wear loose jewelry, bracelets, bulky rings, long necklaces, etc.
• Hair length should be kept short, using a hair net if needed, or tying
long hair up in a bundle.
• Remove all other loose objects from the area that could be drawn into
the machine.
• Follow the recommended Kodak cleaning procedures. Do not use air,
liquid or gas spray cleaners. These cleaners only displace the dust,
dirt or debris to another location within the Scan Station, which could
cause the Scan Station to malfunction.
Supervisors should review their practices and make compliance with
these precautions as a part of the job description for operation of the
Kodak Scan Station 100 or any mechanical device.
1-5