Logging into the
Scan Station
Turning the Scan
Station off
2
Depending on how your Scan Station is configured, you may be
required to login. If so, the following screen will be displayed.
1. Enter your Username, Password and Domain.
2. Click Login.
The Power icon is located on most screens. When the Power icon is
blue (active), click the icon to shutdown the Scan Station.The following
screen will be displayed.
NOTE: Being logged in is considered busy (it assumes if you are
logged in you are scanning). Select the red X to logout, then the
power button (when it turns blue) to shutdown.
A-61808 September 2014