Utility mode
8
Touch [Password].
–
If "Account Track Input Method" was set to "Password Only", the
same password cannot be registered more than once.
The Password screen appears.
9
Type in the password (up to 8 characters long), and then touch [OK].
A screen for retyping the password appears.
10
Retype the password specified in step 9, and then touch [OK].
The user password is set.
11
Touch [Output Permission].
The Output Permission screen appears.
12
Touch a button under "Print" or "Send" to specify the desired settings.
–
To permit printing by the account, touch [Allow].
–
To prohibit printing by the account, touch [Restrict].
–
Touch [All Accounts] to apply the settings in the current screen to
all registered accounts. Touch [All Accounts], touch [OK], and then
touch [OK] in the next screen that appears in order to display a
message and apply the settings to all accounts. At this time, do not
turn off the machine with the main power switch.
–
If color printing is restricted, printing is not possible with the "Auto
Color", "Full Color", "2 Color" or "Single Color" settings.
–
If black printing is restricted, printing is not possible with the "Auto
Color" or "Black" setting.
–
If both color and black printing are restricted, the message
"Copying is prohibited." appears, even if authentication was
completed correctly.
–
If "Color" is set to "Restrict" under "Send", color scanning is not
possible.
C451
11
11-123