Konica Minolta bizhub C451 User Manual page 669

Utility mode
Output Settings
Parameter
Print/Fax Output Set-
tings
Output Tray Setting
Bin Assignment
1
* If optional separator is installed, "Tray 2" is selected as the factory default.
2
* If optional separator is installed, "Tray 1" is selected as the factory default.
Note
The "Output Tray Settings" parameter is available only if the optional fin-
isher or separator is installed.
When an optional output tray is installed on finisher FS-519, the optional
output tray is assigned as Tray 2, and Tray 2 is assigned as Tray 3.
[Bin Assignment] only appears if the optional mailbin kit is installed.
The "Bin Assignment" parameter is set to "Tray 2" only if the optional out-
put tray is installed.
AE Level Adjustment
Description
Specify the initial value for auto exposure. The higher the setting, the
more that the document background is emphasized.
C451
Description
Specify settings for faxing and printing. For details, refer to the User's
Guide [Fax Operations] and the User's Guide [Print Operations].
Select the copy output tray for
each type of job (copies, print-
outs, faxes and reports).
Select whether or not Tray 1 is
specified as mailbin 5 and the op-
tional output tray is specified as
mailbin 6.
Default Setting
*1
Copy: Tray 1
*1
Print: Tray 1
*2
Print Reports: Tray 2
*2
Fax: Tray 2
Not Set
Default Setting
Standard (2)
11
11-22