Konica Minolta bizhub C451 User Manual page 68

Copy operations

Hide thumbs Also See for bizhub C451:

Table of Contents

Before making copies

Press the [Power] (auxil-

iary power) key.

Check that the touch

panel is turned on.

When the [Power] (auxiliary power) key is turned on, the indicator on the

[Start] key lights up in orange, and a screen indicating that the machine

is starting up appears.

After a few seconds, the message "Warming up. Ready to scan." appears

on the touch panel, and the indicator on the [Start] key lights up in blue,

indicating that a job can now be queued.

The default settings are the settings that are selected immediately after

the machine is turned on (the power switch is set to "n") and before any

setting is specified from the control panel or touch panel, and those that

are selected when the [Reset] key is pressed to cancel all settings spec-

ified from the control panel or touch panel. The default settings can be

changed. For more details, refer to "Custom Display Settings" on

The factory default settings are the settings that were selected when this

machine was sent from the factory.

A job can also be queued while the machine is warming up after the

[Power] (auxiliary power) key is turned on. For details, refer to "Scanning

during warm-up" on page 1-38.

After the machine has finished warming up, the scanned image will be

The machine takes about 30 seconds to warm up at normal room tem-

perature (73.4 °F) when the [Power] (auxiliary power) key is turned on after

the main power switch is turned on.

Troubleshooting