Automatically Conserving Energy (Sleep Mode) - Konica Minolta bizhub C451 User Manual

Copy operations

Hide thumbs Also See for bizhub C451:

Table of Contents

Before making copies

Press the [Power Save]

The machine can receive jobs while it is warming up.

The touch panel comes on again and, after the machine has fin-

ished warming up, it is ready to begin printing.

As the factory default, pressing the [Power Save] key causes the machine

to enter Low Power mode. Settings in the Administrator Settings mode

can be changed to put the machine in Sleep mode instead. For details,

refer to "System Settings" on page 11-32.

The Low Power mode can also be canceled by pressing any key in the

control panel or by touching the touch panel.

The length of time until the machine enters Low Power mode can be

For details, refer to "System Settings" on page 11-20 and page 11-32.

Automatically conserving energy (Sleep mode)

If no operation is performed for a specified length of time, the machine auto-

matically enters a mode where it conserves energy.

Although the machine conserves more energy in Sleep mode than in Low

Power mode, the machine must warm up when Sleep mode is canceled to

begin printing again, therefore taking more preparation time than Low Power

As the factory default, the machine enters Sleep mode after 30 minute.