Administrator Authentication - Konica Minolta bizhub C451 User Manual

Copy operations

Hide thumbs Also See for bizhub C451:

Table of Contents

Utility mode

The operation of the "Prohibited Functions When Authentication Failed"

parameter applies to the following passwords.

User passwords, account passwords, user box passwords, passwords

for confidential documents, and the administrator password

If the control panel cannot be operated even after touching [Release]

from the "Prohibited Functions When Authentication Failed" parameter to

specify the items whose operation restrictions are canceled or if an

operation is prohibited from a failed attempt to authenticate the

administrator password, restart the machine. Restart the machine, wait

for the time specified in "Release Time Settings", and then perform the

administrator authentication.

When the machine is turned off, then on again with the main power

switch, wait at least 10 seconds to turn the machine on after turning it off.

The machine may not operate correctly if it is turned on immediately after

being turned off.

Enhanced Security Mode

Settings necessary for applying enhanced security mode appear. Select whether or not to apply

enhanced security mode when the necessary settings are specified. For details, contact your

service representative.

HDD Settings

Check HDD Capacity

Overwrite Temporary

Information concerning the hard disk capacity is

Specify whether or not to overwrite the temporary

image data saved on the hard disk with all opera-

tions for copying, scanning, faxing and computer

printing. For details on the settings, refer to the

User's Guide [Box Operations]. By specifying a

setting to overwrite temporary data, the area of

the hard disk where image data is saved after

printing or sending can be overwritten, and the

data can be erased. This process prevents disclo-

sure of image data on the hard disk.

Default Setting