Konica Minolta bizhub C451 User Manual page 35

Before making copies
No. Part name
14 Mailbin kit MT-502
15 Saddle stitcher SD-505
16 Punch kit PK-510
17 Job separator JS-504
18 Output tray OT-503
19 Video interface kit VI-504*
20 Fax kit FK-502*
21 Stamp unit SP-501*
22 Scan accelerator kit SA-501*
23 Security kit SC-503*
24 Local interface kit EK-602*
* Parts marked with an asterisk are internal options and therefore are not shown in the illustration.
C451
Description
Installed onto finisher FS-519 to divide printed pages
(only with computer printing) and feed them into the
appropriate tray assigned to a specific individual or
group.
Referred to as the "mailbin" throughout the manual.
Installed onto finisher FS-519 so that copies can be
bound or folded at the center.
Referred to as the "saddle stitcher" throughout the
manual.
Installed onto finisher FS-519 to allow hole punching
to be used.
Installed onto the output tray to divide printed pages.
Referred to as the "separator" throughout the manu-
al.
Collects printed pages.
Used for connecting the image controller to the ma-
chine.
Allows this machine to be used as a fax machine.
Applies a stamp to documents that have been
scanned.
For details, refer to the User's Guide [Fax Opera-
tions].
Creates images at high speed when sending scans.
Installed to encode the data saved on the hard disk
so that the hard disk can be used more safely.
Used for connecting the authentication unit (biomet-
ric type), the authentication unit (IC card type), the
JScribe IC card reader/writer and external memory
(USB memory).
1
1-4