Konica Minolta bizhub C451 User Manual page 686

Utility mode
!
Detail
For the procedure on adjusting the printer, refer to "Printer Adjustment"
on page 11-59.
For the procedure on adjusting the finisher, refer to "Finisher Adjustment"
on page 11-70.
For the procedure on adjusting the color registration, refer to "Color
Registration Adjust" on page 11-91.
For the procedure on adjusting the gradation levels, refer to "Gradation
Adjustment" on page 11-95.
[Finisher Adjustment] appears only when an optional finisher is installed.
The Finisher Adjustment parameters that are available differ depending
on the model of the installed finisher.
Only "Black Image Density" is available for OHP transparencies.
List/Counter
Parameter
Management List
Paper Size/Type Counter
Reset Settings
Parameter
System Auto Reset
Auto Reset
C451
Description
Job Settings List The machine settings can be printed.
Store combinations of paper sizes and paper
types to be counted.
Description
Specify the desired length of time until
the automatic system reset operation is
performed.
• Priority Mode:
Select the setting ("Copy" or "Scan/
Fax") for the mode that the machine
enters when the automatic system
reset operation is performed.
• System Auto Reset Time:
Specify the setting (between 1 and 9
minutes or "OFF") for the desired
length of time until the automatic
system reset operation is performed.
Select the setting (between 1 and 9 min-
utes or "OFF") for the desired length of
time until the automatic panel reset op-
eration is performed for each mode
(Copy and Scan/Fax).
11
Default Setting
Priority Mode:
Copy
System Auto Reset
Time: 1 Minute
Copy: 1 Minute
Scan/Fax: 1 Minute
11-39