Konica Minolta bizhub C451 User Manual page 188

Basic copy operations
Setting
Fold/Bind
Center Staple/Fold
Output Tray
Staple
C451
Description
Select one of these settings to fold copies. The copies can also
be bound with staples at the same time.
A Fold/Bind setting can be used if optional finisher FS-608 is in-
stalled.
Select this setting to fold copies. The copies can also be bound
with staples at the same time.
The "Center Staple & Fold" setting can be used if the saddle
stitcher is installed on optional finisher FS-519.
Select the output tray where the finished copies are to be fed.
Select one of these settings to bind the copies with a staple in
the corner or with two staples.
1
2
2-81