Electric seat lift
Electric seat lift
Manual raising/lowering of electric
seat lift
If the seat lift does not work normally because the
batteries are discharged or the adjustment device
is defective, the seat can be raised/lowered manu-
ally.
1. Switch off the main power switch on the con-
trol panel.
2. Remove the cushion from the seat by lifting it
straight up.
3. Remove the seat plate(s). See the illustration.
4. Raise/lower the seat using the seat lift crank
supplied.
WARNING
Drills must not be used in connection with manual operation
of the seat lift. There is a risk of damage to materials.
The seat plate for the Corpus seat is held in
place with two screws.
The seat plates for the PS seat are held in place
with four screws.
Manual raising/lowering of the Corpus seat using
the seat lift crank
26