Download - D-Link SmartPro DGS-1500-20 User Manual

6 Command Line Interface
Command
save
debug info
Each command is listed in detail, as follows:
?
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display a list of commands of the switch:
DGS-1500-28> ?
USEREXEC commands :
config account admin password <passwd>
config ipif System { ipaddress <ip-address> <subnet-mask> gateway <gw-
address> | dhcp }
debug info
download { firmware_fromTFTP tftp://ip-address/filename | cfg_fromTFTP
tftp://ip-address/filename }
logout
ping <ip_addr>
reboot
reset config
save
show ipif
show switch
upload { firmware_toTFTP tftp://ip-address/filename | cfg_toTFTP tftp://ip-
address/filename }
DGS-1500-28>

download

Purpose
Syntax
Description
Parameters
Parameter
To display a list of commands.
?
The ? command displays a list of commands of the switch.
None.
None.
To download and install a firmware, boot, or switch configuration
file from a TFTP server.
download { firmware_fromTFTP tftp://ip-address/filename |
cfg_fromTFTP tftp://ip-address/filename}
The download command downloads a firmware, boot, or switch
configuration file from a TFTP server.
firmware_fromTFTP − Download and install new firmware on the
Switch from a TFTP server.
78
D-Link Web Smart Switch User Manual