Configuration; Smart Wizard Configuration; Ip Information; Password Settings - D-Link SmartPro DGS-1500-20 User Manual

5 Configuration

D-Link Web Smart Switch User Manual
5
Configuration
The features and functions of the D-Link SmartPro Switch can be configured for optimum use through the
Web-based Management Utility.

Smart Wizard Configuration

After a successful login, the Smart Wizard will guide you through essential settings of the D-Link Web Smart
Switch. If you do not plan to change anything, click Exit to leave the Wizard and enter the Web Interface.
You can also skip it by clicking Don't show Smart Wizard next time for the next time you logon to the Web-
based Management.

IP Information

IP Information
will guide you to do basic configurations on 3 steps for the IP Information, access password, and SNMP.
Select Static, DHCP or BOOTP, and
If you are not changing the settings, click on Exit to go back to the main page.
type the desired new IP Address, select the Netmask and type the Gateway address, then click the Apply
button to enter the next Password setting page. (No need to enter IP Address, Netmask and Gateway of
DHCP and BOOTP selection.)
Figure 5.1 – IP Information in Smart Wizard

Password Settings

Type the desired new password in the Password box and again in the Confirm Password, then click the
Next button to the SNMP setting page.
18