L2 Functions > Multicast > Multicast Forwarding - D-Link SmartPro DGS-1500-20 User Manual

5 Configuration
Press Apply for changes to take effect. A router port configured manually is a Static Router Port, and a
Dynamic Router Port is dynamically configured by the Switch when a query control message is received.
To view the Multicast Entry Table for a given VLAN, press the View button.
L2 Functions > Multicast > Multicast Forwarding
The Multicast Forwarding page displays all of the entries made into the Switch's static multicast forwarding
table. To implement the Multicast Forwarding Settings, input VID, Multicast MAC Address and port settings,
then click Add.
VID: The VLAN ID of the VLAN to which the corresponding MAC address belongs.
Multicast MAC Address: The MAC address of the static source of multicast packets. This must be a
multicast MAC address.
Port Settings: Allows the selection of ports that will be members of the static multicast group and ports
either that are forbidden from joining dynamically, or that can join the multicast group dynamically, using
GMRP.
Member - The port is a static member of the multicast group.
None - No restrictions on the port dynamically joining the multicast group. When None is chosen,
the port will not be a member of the Static Multicast Group.
Figure 5.46 –L2 Functions > Multicast > IGMP Snooping VLAN Settings
Figure 5.47 –L2 Functions > Multicast > Multicast Entry Table
Figure 5.48 – L2 Functaions > Multicast > Multicast Forwarding
D-Link Web Smart Switch User Manual
44