Once configured, anyone on the Internet can connect to your Virtual Servers. They must use the
Internet IP Address (the IP Address allocated to you by your ISP).
e.g.
http://203.70.212.52
ftp://203.70.212.52
It is more convenient if you are using a Fixed IP Address from your ISP, rather than Dynamic.
However, you can use the Dynamic DNS feature, described in the following section, to allow
users to connect to your Virtual Servers using a URL, rather than an IP Address.
4.6 WAN Port Configuration
The WAN Port option is on the Advanced menu.
Data – WAN Port Screen
Identification
Hostname
Domain Name
40
Figure 21: WAN Port Screen
Normally, there is no need to change the default name, but if your ISP
requests that you use a particular Hostname, enter it here.
If your ISP provided a domain name, enter it here. Otherwise, this
may be left blank.