Planex BLW-54PM User Manual page 38

This screen lists a number of pre-defined Servers, and allows you to define your own Servers.
Details of the selected Server are shown in the Properties area.
Data - Virtual Servers Screen
Servers
Servers
Properties
Enable
PC (Server)
Protocol
Internal Port No.
External Port No.
38
Figure 20: Virtual Servers Screen
This lists a number of pre-defined Servers, plus any Servers you
have defined. Details of the selected Server are shown in the
Properties area.
Use this to Enable or Disable support for this Server, as required.
•
If Enable, any incoming connections will be forwarded to the
selected PC.
•
If Disable, any incoming connection attempts will be blocked.
Select the PC for this Server. The PC must be running the
appropriate Server software.
Select the protocol (TCP or UDP) used by the Server.
Enter the port number which the Server software is configured to
use.
The port number used by Internet users when connecting to the
Server. This is normally the same as the Internal Port Number. If it
is different, this device will perform a mapping or translation
function, allowing the server to use one port address, while clients
use a different port address.